rfa6t, rfb6t series 3g sdi optimized true 75 terminations 18 awg 75 rg 6 coax cable, or 1694a belden cable rfa6t?74sp3?74sp3?0300 single or double ended www.samtec.com for complete speci cations see www.samtec.com? rfa6t or www.samtec.com? rfb6t rf connector: outer contact material: ni plated brass (bnc7t, mbnc7), au plated becu (din7a), au plated phosphor bronze (hdbnc) center contact material: gold plated brass insulator material: ptfe operating temperature: -65? to +125? impedance: 75 ?3 ( st st) 75 ?4 ( ra ra) frequency range: 0~3.5 ghz * working voltage: 500 vrms max * dielectric withstanding: 1500 vrms min * contact resistance: center contact: 1,5m max outer contact: 0,4m max rohs compliant: ye s rg 6/1694a cable: impedance: 75 ? capacitance: 54 ?pf/meter max attenuation (cable only): 0.21db @ 1ghz for 1 meter conductor size: 18 awg, (1,02mm) .040" dia. conductor material: bare copper insulator material: gas injected foamed polyethylene shield material: tinned copper braid over aluminum foil wrap jacket material: pvc jacket diameter: (7,00mm) .275" jacket color: black rohs compliant: ye s f-211 specifications mates with: bnc7t, mbnc7, din7a, hdbnc cable type end 1 connector overall length ??xxxx? = overall length in millimeters ?0300 (300mm) 11.81" minimum end 2 connector rfa6t = rg 6 cable rfb6t = belden 1694a cable specify end options from chart also available ?connector kits. ? additional plating options available. call samtec. 75 optimized bnc cable assemblies end options ? d4sp3* or ?74sp3 = 75 bnc, straight plug (10? (0,25?) gold on center contact, nickel on shell) (*die cast coupling nut) ?74rp3 = 75 bnc, right angle plug (10? (0,25?) gold on center contact, nickel on shell) ?sing = single ended (end 2 callout) ?xxxxxx = stripped & tinned (end 2 callout) (see chart for callout) a b c stripped & tinned (dimensions in mm) callout ?303030 ?303040 ?403030 ?403040 ?404040 a 3.0 3.0 4.0 4.0 4.0 b 3.0 3.0 3.0 3.0 4.0 c 3.0 4.0 3.0 4.0 4.0 both center conductor and braid shield are stripped, only the center conductor is tinned. call samtec for other sizes or tinning options. end options ?h4sp3 = 75 high density bnc, straight plug (10? (0,25?) gold on center contact, nickel on shell) ?79rp3 = 75 mini bnc, right angle plug (10? (0,25?) gold on center contact, nickel on shell) ?79sp3 = 75 mini bnc, straight plug (10? (0,25?) gold on center contact, nickel on outer contact and shell) ?78sp4 = 75 din, straight plug (10? (0,25?) gold on center contact, gold flash on outer contact, nickel on shell) * see connector component pages for speci c range.
|